Polymeric ferric sulfate, alum flowers dense, excellent performance of sedimentation speed, 5-30 minutes settlement completely.Water quality is good, even 10 times no excess iron ions in the water phase transfer, won't make water is yellow.Its performance is stable, still can be stored for a long time after dissolving, the sedimentation, metamorphism, more not blocking pipe, more significant decolorization, deodorization and dewatering, oil, in addition to bacteria, go out to the water of heavy metal ions, radioactive substances and carcinogens and other effects which have a very strong ability to remove COD, BOD.Suitable water PH range, 4-11 on pollution, including algae, low temperature and low water purification has a unique efficacy, pipe corrosion of equipment.
Product Name: |
Polyferric Sulphate |
Other Name: |
PFS |
English Abbreviation: |
Yellow Powder |
Solubility: |
Easily soluble in water |
Basicity: |
8.0-16.0 |
PH Value: |
2--3 |
Ferric Sulfate Content: |
19%--21% |
Ferric Sulfate Content: |
Drinking Water Industrial Water Various Industrial Wastewater Urban Sewage |
Secco polymeric ferric sulfate use method
1.
Black liquid for papermaking can be directly used in stock solution, and other waste water can be diluted according to the need.
It is recommended to be prepared into a concentration of not less than 10%.
2.
The best dosage should be determined according to the experiment.
3.
Less than 10% of the liquid medicine to be prepared on the same day, the day used up, not retained.
4.
Use clean water to prepare liquid medicine.
When using reclaimed water, a small amount of precipitation is a normal phenomenon.
Product Features
1. It has a good removal effect on algae, iron ions, chroma, odor and organic matter in raw water.
2. Relatively less drug consumption, high effluent rate, low treatment cost (per ton of water treatment cost is 30%-60% of
traditional aluminum salt), good economic benefits.
3. The COD removal rate of the treated water after the use of the product is 5%-15% higher than that of the traditional product.
4. The product has no adverse harm to human health and will not cause secondary pollution to water body after use.
Polymeric ferric sulfate is widely used in drinking water, industrial water, all kinds of industrial wastewater and urban sewage and sludge dewatering purification treatment.
Polyacrylamide (PAM) is a linear polymer, chemical formula is (C3H5NO) N. It is a hard glassy solid at room temperature. The products are liquid glue, latex and white powder particles...
Polyaluminium Chloride (short for PAC) is an inorganic polymer coagulant. It is a polymer water treatment agent with high molecular weight and high charge, which is produced by the bridging effect of hydroxyl and the polymerization of adding anions
Polyferric sulfate is a kind of inorganic polymer coagulant with superior performance. It is a light yellow amorphous powdery solid and easily soluble in water. 10% (mass) aqueous solution is red-brown transparent solution and hygroscopic. Polyferric sulfate is widely used in drinking water, industrial water, all kinds of industrial waste water, municipal sewage, sludge dewatering purification treatment.
If you are interested in our products or have any questions, please fill in the form below. We will contact you immediately after receiving it. Thank you for your choice